INSULATED GLASS

INSULATED GLASS

By combining Low-E coatings, standard and high performance tinted glass, reflective coatings, silk-screened patterns, laminated glass products and more, a wide variety of insulating glass configurations are available to satisfy a wide range of performance and aesthetic requirements. IG units can be fabricated to meet state energy and safety codes, sound control and seismic requirements, impact, bullet, hurricane and blast resistance requirements. IG units can be designed to reduce heat loss and solar heat gain entering the building, with a minimal reduction of visible light transmittance.

 

Insulating glass units are fabricated according to project specifications. IG units can be constructed using a large variety of glass products to achieve desired aesthetics, meet design criteria, safety codes and/or to improve solar control and thermal performance.

 

Glass options include clear, low iron, Low-E's, standard or high performance (spectrally selective) tints, reflective, silk-screened, spandrel, laminated, decorative and wired glass. The glass lites of an IG unit can be annealed, heat-strengthened, tempered or laminated.

 

Insulating Glass APPLICATION

Insulating Glass (IG) units are used in essentially all exterior building applications, including vertical glazing, sloped glazing, overhead glazing and skylights, and also in both vision and spandrel (nonvision) areas. Depending on the glass type used, IG units can be designed for: light and solar control, sound control, ultraviolet screening (to reduce fading), hurricane, earthquake and blast resistance, security, bullet resistance, and decorative applications.

 

Insulating Glass Capabilities

Create a more comfortable environment while working within these Insulated Glass Unit specs.If you have any questions about our architectural glass products, contact us.

Maximum Size: 12000mm x 2500mm （472″x98″）

Minimum Size: 100mm x 100mm（4″x4″）

Spacer Thickness: 6mm(1/4"), 9mm(3/8"), 12mm(1/2"),14mm(0.55"), 15mm(0.59"), 16mm(5/8"),18mm(0.7"),20mm(3/4")

Glass Thickness: 3mm-19mm(1/8"to 3/4")

 

Code Compliance: GB/T 11944  ASTM C1172  EN1279  JIS R3205  AS/NZS4666